P604 24" 4 Head DTF Printer + P6501 DTF Powder Shaker Dryer

Bundle: P604 24" 4 Head DTF Printer + P6501 DTF Powder Shaker Dryer

P604 DTF Printer Specifications:

• Model: Printium P604 24" 4-Head DTF Printer
• Dimensions: Length: 69.1 inches, Width: 30.3 inches, Height: 63 inches
• Weight: Gross: 400 lbs, Net: 335 lbs
• Voltage:220V/110V(+5%), 50Hz/60Hz
• Printing Modes: 4PASS / 6PASS / 8PASS
• Printhead: Epson I3200-A1, 4 pcs
• Media Type: PET Film
• RIP Software: Maintop and FlexiPRINT
• Supported OS: Windows 8 or newer
• Computer Specs: Intel Core i5 11th Gen or higher / AMD Ryzen 5 5000 series or higher, 16GB RAM or more, 512GB SSD or larger
• Operating Temperature: 70°F - 90°F (20°C - 30°C)
• Operating Humidity: 45% - 65%

P6501 DTF Powder Shaker Dryer Specifications:

• Model: Printium P6501 DTF Powder Shaker Dryer
• Available Width: 0-23.6 inches (0-600 mm)
• Applicable Media: Nylon, chemical fiber, cotton, leather, swimsuit, diving suit, PVC, EVA etc.
• Powder Control: Powder shack control, Powder and amount control
• Heat and Dry Function: Front heat plate & Top heater, Lengthen dry fixation, cold fans
• Media Transmission: NEW Belt Type
• Take up Function: Automatic Inductive
• Machine Size: Length: 101.9 inches, Width: 39.5 inches, Height: 42.6 inches
• Packaging Size: Length: 86.6 inches, Width: 44.5 inches, Height: 45.1 inches
• Weight: Gross: 665 lbs, Net: 465 lbs
• Power Requirements: Rated Voltage: 220V, Rated Current: 36A, Rated Power: 7.9 KW, Energy Consumption: 3.5 KW-7.9 KW

P604 DTF Printer:

• Get Professional Help: If needed, seek professional assistance for installation to ensure proper setup.
• Unpack with Caution: Be cautious during unpackaging, as the printer is heavy. It’s recommended to have at least two people for safe handling.
• Follow Installation Guide: Refer to the provided installation guide and documentation from the seller or technical service for a smooth setup process.
• Check Operating Area: Ensure the printer is placed in an area with the correct temperature (70°F - 90°F) and humidity (45% - 65%) to maintain optimal performance. Ensure adequate ventilation to manage potential fumes.
• Connect Printer and Software: Install the RIP software (Maintop or FlexiPrint) on a compatible computer and connect the printer to the system.
• Load Media Correctly: Carefully load the PET film and adjust the media guides for proper alignment.
• Test Print: Run a test print to ensure everything is functioning correctly before starting full production.
• Regular Maintenance: Clean the printheads regularly and check ink levels to ensure smooth operation.

P6501 DTF Powder Shaker Dryer:

• Usage: Connect the DTF printed films to the machine, and the automatic belt system will slide them through the shaker dryer. Use the automatic powder dispenser for even powder distribution. Set the curing temperature based on the material to ensure uniform powder application and optimal curing.
• Powder Management: Use the motor-driven brush and shaker lever to control the powder and remove excess hot melt powder efficiently. This helps maintain consistent quality and prevents waste.
• Heating & Drying: Ensure the quartz infrared heat drying tubes and the front heat plate are set to optimal temperatures for even curing. Monitor the drying system to maintain appropriate heat levels for the material being processed.
• Cooling System: Activate the fan air cooling system after drying to cool the media and prevent warping or bulging, ensuring high-quality results.
• Maintenance: Regularly clean the shaker dryer and check the powder recycling drawer for effective operation and minimized waste. Proper maintenance helps improve performance and longevity.
• Power Connection: Use a 220V AC power supply, ensuring the current does not exceed 36A. The rated power is 7.9 KW, with energy consumption between 3.5 KW and 7.9 KW depending on use.